After a lot of procrastination, here is my Teksumo wing, modified for long range FPV! I am enjoying my ZMR 250 quad a lot, but with summe...
Showing posts with label Home. Show all posts
Showing posts with label Home. Show all posts
Build Log - ZMR Mini quad
13 August
0
Since the mini quad craze begun I have been watching countless youtube videos of skilled people zipping through forests, parking lots or u...
DIY Diversity Ground Station for FPV flying...with hysteresis
19 May
0
Now that the tricopter is on its way to become my FPV platform I found myself stuck with the ground station being my video receiver strappe...
How to set up your multicopter for FPV
02 February
0
I have been flying my FPV Manuals Tricopter for a while now, and broke its legs multiple times either losing control or because of the o...
DIY Thrust Measurer
22 January
0
In order to test a motor / prop / ESC combo you can certainly read the specs on your equipment and hope the manufacturer did not inflate...
The basics of electric power: Brushless motors
12 January
0
We spoke about brushed motors , about ESCs , and about LiPo batteries . Now it is time to discuss brushless motors, which is probably th...
Blade 130X Maintenance schedule and upgrades
17 October
0
A while ago I decided to buy a second hand Blade 130X which came with a good bunch of upgrades already installed. I was on the market fo...
Hobbyking Sbach v2 build log / review - Part 3
01 July
0
Almost there! Wings and tail are done, let's finish up this hottie and get her ready for the maiden! Again this third and las...
Hobbyking Sbach v2 build log / review - Part 2
29 June
0
After completing the wing , an incredibly straight forward phase, where everything fit in place with little to no modification, I start...
Hobbyking Sbach v2 build log / review - Part 1
26 June
0
The XtremeAir Sbach 342. Image courtesy of Airliners.net So, after I destroyed my home made 1m supercharged Ugly Stick I decided two thi...
How to configure your Spektrum radio with Phoenix RC
11 May
0
When I started flying RC helicopters I had been warned that it would have been a tough quest, and while I was flying fixed pitch helicop...
The basics of electric power: Brushed motors
03 May
0
A typical brushed motor After having discussed LiPo batteries and ESCs , today I would like to talk a bit about what powers up our ele...
How to fit a T-Rex 450 Pro into a scale fuselage
25 April
0
So, After crashing, digging holes in parks and fields, repairing, spending days on the sim trying to perform some 3D...well I decided t...
The basics of electric power: ESCs
18 February
0
A big ESC, the YGE 90A, image courtesy of f3aunlimited.com WHAT IS AN ESC After talking about batteries , and brushed motors it is t...
How to build balsa wheel spats
15 February
0
I have been looking everywhere for a decent pair of wheel spats (wheel pants for the guys on the other side of the pond) to fit my scra...
Align T-Rex 250 Build log
12 February
0
After flying for almost a year with my loyal Blade 400 I decided to sell it to a local bloke and buy a 250 class size. At first i was very...
How to wire and program a tricopter
02 December
0
I think that other than getting into RC flying stuff after being inspired by my dad, another thing that motivated me is certainly the ab...
How to solder bullet connectors
01 December
0
A bit of "back to the basics" kind of article here. When I started off soldering things to other things I always found it har...
The basics of electric power: LiPo batteries
13 May
0
Some LiPo batteries, from left to right: 1S - 160mAh, 1S - 300 mAh, 2S - 370 mAh, 3S - 460 mAh, 3S - 1000 mAh, 3S - 2200 mAh When my da...
The cheap solution to tail problems: EMax ES9257
06 May
0
After installing the Spartan Quark on my Blade 400 I still was not getting the results I was expecting. Mainly the tail would blow out sl...
Subscribe to:
Posts
(
Atom
)